ELECTRONIC LEVEL SENSOR 230V (1/2 NPT) (COMH-230-T/012)

COML/H offers a simple and compact level monitoring system with an integrated alarm function. In case of an insufficient/overfilled liquid level in a receiver (oil or refrigerant) an alarm signal will be generated. This ensures the reliable operation of the refrigeration system and avoids greater damage to the system components.A Hall-effect sensor and a built-in float magnet system measuring the liquid level. Depending on the position of the float and the resulting change in magnetic field strength creates a variable output voltage.This is evaluated by an electronic board and the LED’s will be driven accordingly. As soon the liquid level reaches the yellow zone the output Signal S will be switched on with a delay of 10 sec. A further drop/rise of Level to the red alarm range causes the Relays switches with a delay time of 90 seconds into the alarm state. This signal can be used for data processing or shut down of the system. If a correct fluid level can be restored, the alarm and the signal (S) will be reset.To monitor the minimum level COML/H will be installed in the normal position.For monitoring the maximum level, the device is rotated by 180° for the installation (see Figure 1 on page 3). This means that one version can be used for both applications, minimum and maximum level control.

You can click the PDF icon next to the document you want to download

No	Explanation	Document	PDF
1	Electronic Liquid Level Sensors	DEKA_Catalogue_Electronic Liquid Level Sensor_2023

You can click the PDF icon next to the document you want to download

No	Explanation	Document	PDF
1	Electronic Liquid Level Sensors	DEKA_COM_UKCA_CE_EN